Old Style Smoke Extractor Linkage System Configuration
Attached images show the setup of the old style smoke extractor damper linkage system arms.
- All
- BBR-700
- BBR-79
- BBR-79-1
- BBR-79-2
- BBR-79-3
- BBR-79-C
- BMJ-1000
- BMJ-15E
- BMJ-200E
- BMJ-200i
- BMJ-350i
- BMJ-6E
- Burner / Elements
- Cabinet
- Controls / Electrical Components
- Convection
- MLR-150
- MLR-150-M
- MLR-850
- OT-300
- Rolltisserie
- Rolltisserie RL
- Rolltisserie RS
- Rotisserie / Drive
- SC-200
- SC-600
- SP-1000
- SP-700
- SP-700-M
- SP-750
- SPK-1000
- SPK-1400
- SPK-1400-M
- SPK-280
- SPK-280-M
- SPK-500
- SPK-500-M
- SPK-700
- SPK-700-M
- SPX-300
- SPX-300-M
- SPX-500
- SRG-400
- UXR-100
- Venting / Smoke Evacuation
- XLR-1000
- XLR-1400
- XLR-1400-M
- XLR-1600
- XLR-1600-4
- XLR-350
- XLR-600
- YK-100A
- YK-200
- All
- BBR-700
- BBR-79
- BBR-79-1
- BBR-79-2
- BBR-79-3
- BBR-79-C
- BMJ-1000
- BMJ-15E
- BMJ-200E
- BMJ-200i
- BMJ-350i
- BMJ-6E
- Burner / Elements
- Cabinet
- Controls / Electrical Components
- Convection
- MLR-150
- MLR-150-M
- MLR-850
- OT-300
- Rolltisserie
- Rolltisserie RL
- Rolltisserie RS
- Rotisserie / Drive
- SC-200
- SC-600
- SP-1000
- SP-700
- SP-700-M
- SP-750
- SPK-1000
- SPK-1400
- SPK-1400-M
- SPK-280
- SPK-280-M
- SPK-500
- SPK-500-M
- SPK-700
- SPK-700-M
- SPX-300
- SPX-300-M
- SPX-500
- SRG-400
- UXR-100
- Venting / Smoke Evacuation
- XLR-1000
- XLR-1400
- XLR-1400-M
- XLR-1600
- XLR-1600-4
- XLR-350
- XLR-600
- YK-100A
- YK-200
-
Old Style Smoke Extractor Linkage System Configuration
-
Procedure To Properly Set The Set Screw On Your Smoke Extractor Damper Motor
Procedure To Properly Set The Set Screw On Your Smoke Extractor Damper Motor
Open the damper to its open position and also turn on the actuator motor so it goes to its fully open position. Once the motor is in the fully open...
-
No Power to Smoke Extractor
No Power to Smoke Extractor
When you open the doors you can check the clear relay that does NOT have a red wire. You should have 120v across the coil A & B, and when...