Firebox Removal Bolt & Nut Sizes
½-13 stud (this was a bolt welded from the back side of the liner) with acorn nut on the older k series ¼-20 bolts with a threaded insert on liner...
Service Bulletins
-
Firebox Removal Bolt & Nut Sizes
-
No Location For Smoke Extractor
No Location For Smoke Extractor
Older model smokers that were not built with a smoke extractor sometimes did not come with a location to install one later where newer smokers come with a removeable blank...
-
Old Style Smoke Extractor Installation Instructions
Old Style Smoke Extractor Installation Instructions
Attached images provide needed information about installing an old style smoke extractor with a linkage system for the damper.
-
1850 Gearbox Replacement Oil
1850 Gearbox Replacement Oil
Belt driven gearbox 1850 in old style smokers uses Mobile SHC 634 Synthetic Oil that can be ordered here: Found in our online store part # 095002
-
BBR-79-C Burner Assembly
BBR-79-C Burner Assembly
BBR-79-C smoker was a shortly made smoker specifically for catering. It uses the same burner assembly as a BBR-700.
-
Converting Old Style Black Hood Relay to New Style Socketed Relays
Converting Old Style Black Hood Relay to New Style Socketed Relays
To convert an old style black coil relay that was used for powering hood or exhaust systems should be wired as follows. The current service bulletin SP2020-001 does not cover...