Contact US | About Us | Cart | My Account | Schedule Service | Apply for financing. Learn more | 409-886-8626
17 lenders are ready to fight for your business
How much money would you lose if your smoker went down?
Wire Harness Connector (TURCK # MF3131-0) Installation Instruction. This connector is attached to the wire harness on the Oven Side and the mating connector is on the proximity switch. 1. ...
½-13 stud (this was a bolt welded from the back side of the liner) with acorn nut on the older k series ¼-20 bolts with a threaded insert on liner...
Older model smokers that were not built with a smoke extractor sometimes did not come with a location to install one later where newer smokers come with a removeable blank...
Attached images provide needed information about installing an old style smoke extractor with a linkage system for the damper.
Belt driven gearbox 1850 in old style smokers uses Mobile SHC 634 Synthetic Oil that can be ordered here: Found in our online store part # 095002
To convert an old style black coil relay that was used for powering hood or exhaust systems should be wired as follows. The current service bulletin SP2020-001 does not cover...