No Power to Smoke Extractor
When you open the doors you can check the clear relay that does NOT have a red wire. You should have 120v across the coil A & B, and when...
Troubleshooting
-
No Power to Smoke Extractor
-
Replacing old thermostat 1006 with new digital thermostat 432001
Replacing old thermostat 1006 with new digital thermostat 432001
As of 01/16/07 the old part number 1006 thermostat is no longer be available, it has been replaced by part number 432001 digital temperature control. This change is being made to provide better...
-
Digital Cook & Hold Digital Thermostat Programming Instructions
Digital Cook & Hold Digital Thermostat Programming Instructions
CONTROL OPERATING INSTRUCTIONS 1. The product loading doors must be closed. 2. The control should be in the “IDLE” mode. (The burner, convection fan, and the rotisserie will be off)....
-
What does the "B Fail" Error Mean?
What does the "B Fail" Error Mean?
A "B Fail" error on your thermostat means your burner attempted to ignite for 3 full cycles without success. The burner control module generally displays a flashing fault code to...
-
Burner BTU, Orifice, and Pressure Guide
Burner BTU, Orifice, and Pressure Guide
On this page Gas Pressure Ratings BTU Ratings and Orifice Sizes **NOTICE**All repairs should be performed by a certified technician. Southern Pride of Texas® is not liable for any damages,...
-
Burner Troubleshooting
Burner Troubleshooting
NOTICE All repairs should be performed by a certified technician. Southern Pride of Texas® is not liable for any damages, or injury if you choose to attempt repairs on your own....
-
What should your flame look like?
What should your flame look like?
Generally speaking whether NAT gas or LP gas you should have a primarily blue flame with a slight yellow tip. This is a generallized statement, and depending on things...