How often should I clean my Southern Pride smoker?

Clean the interior of your Southern Pride smoker after every use to prevent grease buildup. Wipe down product racks, drain pans, and interior walls while still warm. Perform a deep clean monthly if used daily: remove and soak racks, clean the firebox ash pan, inspect door gaskets, and clean the convection fan housing. Annual service should include a full disassembly inspection by a qualified technician.

What type of wood should I use in a Southern Pride smoker?

Southern Pride smokers are designed to use 2-3 fireplace-size logs per cook cycle. Use seasoned hardwoods such as hickory, oak, cherry, apple, or pecan. Avoid softwoods like pine or cedar — they contain resins that produce acrid smoke and can damage interior components. Wood should be dry and seasoned at least six months. Never use treated, painted, or chemically processed wood.

What is the cook temperature range for Southern Pride smokers?

All current Southern Pride gas rotisserie smokers operate between 140°F and 325°F (60°C to 163°C). The standard digital thermostat controls cook temperature only. Models with the optional Cook & Hold control (C&H) allow programmable cook cycles followed by a hold phase at 140°F minimum. The high-limit safety control trips at 340°F to protect the unit.

How do I season a new Southern Pride smoker before first use?

Before cooking food, season your new Southern Pride smoker by running it empty at 250°F for 2-3 hours with 1-2 small pieces of hardwood in the firebox. This burns off any manufacturing oils and cures the interior surfaces. Wipe down the interior with a food-safe oil after the burn-in cycle. Repeat once more before your first actual cook. Refer to your model's owner's manual for model-specific seasoning instructions.

How long does it take for a Southern Pride smoker to preheat?

Most Southern Pride gas rotisserie smokers reach cook temperature in 20-40 minutes depending on ambient temperature and model size. Larger models like the SPK-1400 and MLR-850 may take up to 45 minutes in cold weather. Always allow the smoker to fully preheat and stabilize before loading product. The digital thermostat will maintain the set temperature once reached.

Where can I find parts for my Southern Pride smoker?

Southern Pride of Texas carries over 1,000 OEM Southern Pride replacement parts in stock and ready to ship from Orange, TX. Parts for current production smokers (SPK-1400, SPK-500, SP-700, MLR-850, MLR-150, SPX-300, SRG-400, SC-100, SC-300) typically ship same day if ordered before 3PM CST. Parts for discontinued models may require 2-3 weeks. Call (409) 886-8626 or shop online at southernprideoftexas.com.

Southern Pride SPK-500 Gas Rotisserie Smoker

Southern Pride SPK - 500 Gas Rotisserie Smoker - Southern Pride of Texas | Smokers & Smoker Parts

Features

Convection Air System

The 75,000 BTU (22KW) burner heats the smoker cabinet and ignites the 2-3 fireplace size logs in the firebox to obtain the desired flavor, aroma, and texture.

The convection fan draws the smoke from the firebox and circulates the smoke throughout the smoker cooking cabinet.

The Subterthermic® front or rear flue increases the smoke flavor of the product, increases the heat efficiency, and reduces the wood usage.

Smoker Interior

The entire smoker interior is stainless steel ensuring easy cleaning and decades of trouble-free use.

The smoker comes standard with (5), 3-tier rack hangers that hold a maximum of (15), 12" x 42" (305 x 1067mm) nickel chrome plated product racks with 3 1/2" (89mm) spacing.

Manual Digital Control Panel

The standard digital thermostat allows for cook temperature selection between 140° to 325°F (60° to 163°C), and will maintain consistent temperature throughout the cook cycle.

The rotisserie can be advanced by pressing and holding the rotisserie advance button, or stepping on the rotisserie foot pedal for hands-free operation.

Smoker Exterior

The smoker exterior is stainless steel ensuring easy cleaning and decades of trouble-free use.

The convection fan access door allows the convection fan blade to be accessed from the outside of the smoker for easy cleaning to ensure proper airflow and to prevent the convection fan motor from failing.

Compatible Models

Optional Features

Programmable digital cook and hold control panel

The cook and hold digital thermostat allows for cook temperature selection between 140° to 325°F (60° to 163°C), cook time, and hold temperature.

The rotisserie can be advanced by pressing the up button on the control, or stepping on the rotisserie foot pedal for hands-free operation.

Mirror image

Includes firebox and drain on left side; drive system and service bay on right side.

Glass product doors

Tempered glass in the center of each product door allows for the viewing of the product during the cook cycle without opening the doors.

Includes a manual light switch on the control panel to activate the interior light without opening the product door.

Working height locking casters

Allows mobility for cleaning and servicing.

Trailer mount legs

Required for trailer mounting to customer supplied trailer.

Stainless steel product racks

The standard nickel chrome product racks can be upgraded to stainless steel product racks.

Smoke extractor damper

Activates automatically when the product doors are opened, and used in conjunction with an exhaust fan (not supplied) to evacuate the smoke from the smoker prior to opening the product doors.

Product shelf

12" deep shelf for easier product loading and unloading.

Lockable control panel cover

Prevent tampering of control settings.

Delivery casters (set of 4)

Used to lower the smoker and allow for easier maneuvering during shipping and installation.

Through the wall insulation kit

Used to put between the smoker and the wall when installing the smoker directly through a wall constructed of combustible material.

Through the wall stainless steel trim kit

Covers the gap between the smoker and the wall on all four sides of the smoker. Kit is for one side of building, two kits can be used for interior and exterior of the building.

Mobile rack retainer pins and clips

Stainless steel pins and clips are inserted through each side of the product rack hangers and product racks to hold product racks in place during transit.

VSP eyebrow hood system

Custom vent hood that attaches directly to the smoker and is ducted out of the building to capture the smoke from the smoker when the product doors are opened.

Pork Butts (8-10 lbs)(3.6 - 4.5 kg) each......60 pieces
St. Louis Ribs (2.75 lbs)(1.2kg) each...........60 pieces
Whole Chicken (3-4 lbs)(1.4 - 1.8 kg) each..70 pieces
Beef Brisket (12-15 lbs)(5.4 - 6.8 kg) each..20 pieces

Capacities will vary based on product specifications and loading method.

All in-stock units ship via UPS from Orange, TX. Typical transit time 1–5 business days depending on your location and selected service. Large units (SP-700, SPK-1400, mobile units) may require freight — we will contact you to arrange delivery.

Will Call is also available at our warehouse: 1812 N 16th St, Orange, TX 77630 — Mon–Fri 10am–6pm (closed 1–2pm).

Southern Pride of Texas offers free technical support on all Southern Pride equipment — whether you bought it from us or not. Call us at (409) 886-8626 or visit our Support Center for manuals, service bulletins, and exploded view diagrams.

Southern Pride SPK-500 Gas Rotisserie Smoker

SKU: SPK-500

$27,831.00

or 4 interest-free payments of $6,957.75 with Afterpay

Price shown before shipping cost applied

✅

In Stock — Ready to Ship

This product is in stock and most orders ship same day if ordered before 3PM CST.

B2B Financing Available

Qualified businesses may apply for financing. Apply today →

Southern Pride of Texas employs a structured shipping policy to ensure that customers receive their products in a timely and efficient manner. The shipping methods utilized are tailored to the type and size of the order, optimizing both delivery speed and safety.

For standard orders, Southern Pride of Texas ships exclusively via UPS. This method is chosen for its reliability and efficiency in handling packages. However, for large orders, a selection of specific products may be shipped via palletized freight. This alternative shipping method is designed to accommodate bulk items, ensuring they are transported securely and efficiently.

New smokers are shipped via truck or trailer, with an expected delivery timeframe of approximately one week from the date of order placement. This timeframe allows for the careful handling and transportation of these larger items, ensuring they arrive in optimal condition.

For smoker parts associated with current production smokers, the shipping process is expedited. These parts are generally ready to ship on the same day the order is placed. However, it is important to note that some specific parts may have a lead time of up to five days for production before they can be shipped. This variability is due to the nature of the parts and their availability.

Additionally, manufactured parts such as hangers, carousel wheels, axles, and covers for discontinued model smokers may require a longer lead time of 2-3 weeks before shipment. This extended timeframe accounts for the production processes involved in creating these specialized components, ensuring that they meet the quality standards expected by customers.

In summary, Southern Pride of Texas is committed to providing efficient shipping solutions tailored to the specific needs of its products. By utilizing UPS for standard orders and offering palletized freight for larger shipments, the company ensures that customers receive their orders promptly and in excellent condition. The shipping timelines for new smokers and smoker parts reflect the company's dedication to quality and customer satisfaction.

🚚Most products ship same day if ordered by 3PM CST

🔧Free tech support included

✅Authorized Southern Pride dealer

📞(409) 886-8626 Mon–Fri

🕙Mon–Fri 9AM–6PM (Lunch 1–2PM)

📍Parts: 1812 N 16th St | Smokers: 9990 I-10 W, Orange TX

🔒 Payment & Security

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

🔥 Don't Miss Out

Subscriber-Only Deals on Parts & Equipment

Get exclusive discounts, early access to new inventory, service bulletins, and promotions delivered straight to your inbox. Subscribers save more.

✦ 5% off your first order when you sign up ✦