Rottiserie, Burner, Convection Do NOT Stop With Doors Opened
Door prox switch is stuck closed, or the relay is stuck closed. If you drop the magnetic door switch, and look at the red indicator light on the prox switch...
Contact US | About Us | Cart | My Account | Schedule Service | Apply for financing. Learn more
17 lenders are ready to fight for your business
How much money would you lose if your smoker went down?
Call Today To Schedule Your Maintenance or Repair
Door prox switch is stuck closed, or the relay is stuck closed. If you drop the magnetic door switch, and look at the red indicator light on the prox switch...
To test for a faulty rotisserie advance button test for 120v across the N/O block on the back of the switch. When you push the button you should get 120v,...
Open the damper to its open position and also turn on the actuator motor so it goes to its fully open position. Once the motor is in the fully open...
When you open the doors you can check the clear relay that does NOT have a red wire. You should have 120v across the coil A & B, and when...
Some folks wonder why you cannot use the cheaper new style hangers in place of the more expensive old style welded hangers. You cannot use a new style hanger on...
Your chain drive Southern Pride rotisserie smoker not spinning? Here is a guide to help you diagnose it correctly. CLICK HERE TO VIEW GUIDE
**NOTICE**All repairs should be performed by a certified technician. Southern Pride of Texas® is not liable for any damages, or injury if you choose to attempt repairs on your own.When dealing...
As of 01/16/07 the old part number 1006 thermostat is no longer be available, it has been replaced by part number 432001 digital temperature control. This change is being made to provide better...
**NOTICE** All repairs should be performed by a certified technician. Southern Pride of Texas® is not liable for any damges, or injury if you choose to attempt repairs on your...
If you cannot turn your smoker off using the main power switch then your normally open (NO) contact block may be stuck closed or shorted closed. To verify this you...
CONTROL OPERATING INSTRUCTIONS 1. The product loading doors must be closed. 2. The control should be in the “IDLE” mode. (The burner, convection fan, and the rotisserie will be off)....
Installing part number 432001 digital thermostat in place of part number 433001 mechanical will provide better temperature control and quality of product. This also eliminates the need for the thermometer. To make...
A "B Fail" error on your thermostat means your burner attempted to ignite for 3 full cycles without success. The burner control module generally displays a flashing fault code to...