Contact US | About Us | Cart | My Account | Schedule Service | Apply for financing. Learn more

BBR-700, BBR-79-1, BBR-79-2, BBR-79-3, MLR-150, MLR-850, SP-1000, SP-700, SP-700-M, SP-750, SPK-1000, SPK-1400, SPK-1400-M, SPK-280, SPK-280-M, SPK-500, SPK-500-M, SPK-700, SPK-700-M, SPX-300, SPX-300-M, SPX-500, SRG-400, Venting / Smoke Evacuation, XLR-1000, XLR-1400, XLR-1400-M, XLR-1600, XLR-1600-4, XLR-350, XLR-600

Procedure To Properly Set The Set Screw On Your Smoke Extractor Damper Motor

Coby Poluk | 20 de septiembre de 2023

Open the damper to its open position and also turn on the actuator motor so it goes to its fully open position.

Once the motor is in the fully open position and the damper is in its fully open position then you can tighten the set screws.

Anterior Siguiente

Volver al principio